PIXAR City1 250W Step-Through Electric Bike – 700C
Key specifications
- Motor
- 250W rear-hub motor
- Battery
- 36V 10.4Ah / 374Wh
- Assist limit
- 15.5mph / 25km/h
- Range
- Up to 50km assisted
- Tyres
- 700C × 40C
- Brakes
- Mechanical disc brakes
PIXAR City1 250W Step-Through Electric Bike
The PIXAR City1 is a non-folding step-through electric bike supplied in its UK EAPC configuration with a 250W rear-hub motor and assistance limited to 15.5mph (25km/h). Its removable 36V 10.4Ah battery provides approximately 374Wh for everyday assisted cycling.
A lockout front suspension fork, 700C × 40C tyres and mechanical disc brakes balance comfort with predictable control. Shimano 7-speed gearing, wired front-and-rear lights, full-length mudguards and a rear rack complete the practical city setup.
250W city assistance
The rear-hub motor provides pedal assistance up to 15.5mph (25km/h) in the supplied UK configuration. Keep any higher-speed or independent-throttle feature disabled for EAPC use; such functions are restricted to private land unless the bike meets motor-vehicle requirements.
Removable 374Wh battery
The 36V 10.4Ah battery removes for charging or secure storage. The maximum assisted-range estimate is up to 50km, with a typical charging time of approximately 4–6 hours using the 42V 2A charger.
Easy-access step-through frame
The aluminium low-step frame makes mounting straightforward. A lockout front fork, 700C × 40C tyres, Shimano 7-speed gearing and front-and-rear mechanical disc brakes provide a familiar, practical ride for daily use.
Technical specifications
| Brand | PIXAR |
|---|---|
| Model | City1 |
| Product type | Non-folding step-through electric bike |
| Motor | 250W continuous-rated rear-hub motor |
| UK EAPC assist limit | 15.5mph / 25km/h |
| Higher-speed or throttle mode | Not part of the UK EAPC configuration; private-land use only if enabled |
| Battery | Removable 36V 10.4Ah lithium-ion battery; approximately 374Wh |
| Estimated range | Up to 50km with pedal assistance |
| Charging time | Approximately 4–6 hours |
| Charger | 42V 2A |
| Gearing | Shimano 7-speed chain drive |
| Tyres | 700C × 40C |
| Suspension | Lockout front suspension fork |
| Brakes | Front and rear mechanical disc brakes |
| Frame | 6061 aluminium step-through frame |
| Lighting | Wired front LED headlight and rear light |
| Water resistance | IP54 whole-bike rating; electrical components tested to IPX4 |
| Maximum load | 120kg |
| Dimensions | Approximately 175 × 69 × 120cm |
| Recommended rider height | 155–190cm |
| Rear rack capacity | Up to 25kg within the maximum total load |
| Included equipment | Electric bike, removable battery, charger, keys, pedals, front wheel, user manual and toolkit |
Frequently asked questions
Is the PIXAR City1 a folding bike?
No. The City1 uses a step-through city frame but does not fold.
Is this the UK EAPC version?
Yes. This listing is for the 250W version with pedal assistance limited to 15.5mph (25km/h). Confirm the supplied data plate and settings before public-road use.
Can a higher-speed setting be used on the road?
No. Any unlocked or independent-throttle configuration is for private land only unless the bike has all approval, registration, insurance and rider licensing required for a motor vehicle.
What is the estimated range?
The maximum pedal-assisted estimate is up to 50km, subject to the conditions described in the range notice.
What practical equipment is included?
The bike has wired front-and-rear lights, mudguards and a rear rack rated to carry up to 25kg within the overall 120kg load limit.
Delivery, returns and support
Electric Scooters London provides UK-wide delivery, specialist product guidance and after-sales support from our London team.
Our team can help with setup, care, compatible accessories and servicing before and after your purchase.
Before ordering: Delivery information, returns & refunds, and warranty & support.
PIXAR City1 product details
